All Of Your Roofing Needs For The Belleair Area

Please complete the form. As soon as you have finalized the form, we will have the ability to get in touch with the very best roof organizations in Belleair and you will then be offered quotes from each for the organizations that can provide what you are trying to find, allowing you to choose who you would like to deal with.

Belleair Bluffs, Clearwater, Largo, Harbor Bluffs, Ridgecrest, Four Corners, Indian Rocks Beach, South Highpoint, Greenbriar, Dunedin

Single Ply Roofing in Belleair

Single Ply roofing is made up of a synthetic polymer-based roofing material, it also provides a waterproof layer to your roofing system in a single sheet..

Single ply roofing is a low cost alternative to conventional roofing. It is also light-weight, flexible, and easy to install which is making it an increasingly popular option for both new build and refurbishment jobs.

If this is an option that you have been exploring however you are still not sure whether it is the very best service for your requirement, please click the button at the top of the page and complete the form. As soon as you have finished the form, we will be able to contacts the very best roof companies in Belleair and you will then be offered quotes from each, allowing you to choose who you would like to deal with.

When it concerns the style of business buildings, more and more designers are choosing low-sloped roofs. Low-sloped roofs cost less to build, reduce the overall volume of conditioned air in the structure, and easily provide an isolated place for heating, cooling and fire suppression equipment. Defining a roofing material for low-sloped roofs traditionally implied built-up roofing (BUR) and utilizing asphalt or coal tar. Recently however, variations on single-ply roofing membranes have controlled the marketplace.

The main goal of any roofing job is to avoid water penetration. Mitigating damage from a leaky roof is pricey and time consuming. Low-slope roofs are not perfectly flat however have a minor pitch to keep water from pooling. If a roofing membrane establishes a hole or if the joints are not sealed effectively, water can trigger damage to a rooftop and ultimately discover its way into a structure.

Single-ply roof products can be set up directly on the authorized roofing substrate. This can considerably reduce setup time, material expenses and additionally enable simpler setup. The performance, cost and setup benefits of single-ply products compared to conventional multi-layered systems has actually considerably increased their approval in the market.

A Walk Through of Roofing Options

Before diving in the world of modern single-ply low-slope roof choices, it’s handy to have a historical point of view on conventional products and systems. Though still in use, the last 15 years have shown a considerable trend away from built-up roofing and similar systems and the industry has actually moved quickly towards single-ply products.

The “Old Reliable” asphalt roof

BUR is time-tested, and still enjoys some ardent fans today. BUR is set up by imbedding roofing felts in modified hot asphalt. This process is done several times, common choices are 3, 4 or 5-layer systems, and after that covered with coarse gravel. An upgraded twist on the BUR is to use a granular cap sheet, or field used reflective coatings to provide additional thermal and UV security. Since there are several layers associated with installing BUR systems, this option tends to be robust and resilient, however also has a couple of drawbacks. The binding representative for an effective setup is the asphalt which can be labor intensive to install. Likewise, the process inevitably implies that the area around the structure will need to tolerate the unique smell of melted asphalt throughout the setup process. In some circumstances where high customer traffic must be maintained, the strong fumes can be off-putting and reason enough for structure owners to move onto another roofing material alternative.

Styrene Butadiene Styrene (SBS)

SBS roofing systems are bituminous based systems that have been customized with rubber that enables the material to stay flexible for a larger range of temperatures. This is specifically advantageous in chillier environments. SBS has actually been around since the mid-1970’s and has 4 primary setup choices consisting of torch, hot asphalt, cold used and even self-adhering rolls. Because of the several setup choices, SBS can be set up year-round regardless of ambient air temperatures, an useful alternative when building dates shift to cooler months. These rolls are reinforced with normally polyester or fiberglass that makes the material really resilient, while also allowing for customizations to satisfy particular style needs. On the disadvantage, SBS does not weather well if constantly exposed to a high level of oil or hydrocarbon-based chemicals. Likewise, setup expenses can require a longer return on investment window, indicating short-term owners wanting to “flip” a residential or commercial property might not want to carry the preliminary cost. Another consideration with SBS is that it is very important that a knowledgeable (and licensed) specialist be picked for the setup process.

Atactic Polypropylene (APP)

APP is developed to have a higher softening temperature, and is ideal for setup in hotter environments. The standard chemistry is similar to SBS, however can be more fragile at chillier temperatures. The bituminous material has actually been customized with a crystalline plastic which enables it to stay stiff in high temperature circumstances, and ideal characteristic for locations that experience both severe heat and strong wind occasions. The resistance to heat implies that there are just 2 feasible setup techniques, cold adhesive or torch application. The majority of APP systems include polyester reinforced backing and fiberglass reinforced which gives the material a higher tear strength. While APP systems carry out well in high temperature regions, they are not recommended for cold environments, and due to the technical nature of the setup process, fewer competent contractors are offered for jobs.

The Rise of Single-ply

BUR systems require several layers of roof material and asphalt in order to develop a waterproof and resilient surface area. Likewise, SBS and APP systems use several layers consisting of a base ply, and an adhesive layer under the SBS or APP cap ply to complete the setup.

By contrast, single-ply roof products can be set up directly on the authorized roofing substrate. This can considerably reduce setup time, material expenses and also enable simpler setup. The performance, cost and setup benefits of single-ply products compared to conventional multi-layered systems has actually considerably increased their approval in the market. Nevertheless, to fully appreciate the benefits of single-ply roof products, it is very important to understand the variations in single-ply products and how they are produced.

There are three popular kinds of single-ply low-slope roof jobs: EPDM, PVC and TPO. 

EPDM – Cured Ethylene Propylene Diene Monomer

The advancement of EPDM, or rubber roofing, offered a system that is generally simpler and more effective to install than asphalt or coal tar BUR. The first EPDM roofing system membrane was developed in 1965, 2 years after EPDM rubber production started. EPDM, as a roof material, is traditionally black and has the same feel as the rubber used in tire inner tubes. In the early 1980s, white EPDM became available as a color option, and butyl-based adhesives changed the neoprene-based adhesives. Several years later, reinforced EPDM entered into the United States market. In 1992, reinforced attaching strips and seam tape changed seam adhesives.

Basic material used to develop EPDM include equivalent parts polymer and carbon black (for UV resistance), comprising about 50-60 percent of the formula. The rest is of the products normally are used for processing, fire resistance and stability.

During manufacturing, the thermoset EPDM is developed through the chemical cross connecting of polymers, or molecular chains. A distinguishing characteristic is that EPDM can only be bonded to itself throughout setup by make use of of an adhesive or tape because, as soon as cured, brand-new molecular linkages can not be formed. The material can be extruded or calendered into sheet form and can be reinforced with a polyester scrim for greater tear strength performance. It is very important to keep in mind that extruded sheets have fewer pockmarks and air inclusions than calendered sheets.

EPDM does well due to the fact that it is extremely UV steady due to the carbon black and has relatively high setup effectiveness and consistency. The setup of thermoset and thermoplastic products will be talked about in depth later in this post.

Polyvinyl Chloride (PVC)

Likewise called vinyl, PVC is made up of ethylene and chlorine. In its compounding process, vinyl resin is mixed with biocides, color pigments, heat stabilizers, ultraviolet light inhibitors and plasticizers. PVC is recyclable and fireproof, and it uses fewer petrochemicals than other roofing systems.

A PVC roofing system includes a single-ply membrane made up of 2 layers of PVC material covering a reinforcement scrim. The leading layer is UV-resistant and flexible and can take on color through coloring. The bottom ply is typically grey or black PVC and includes more plasticizers for flexibility and weldability. The reinforcements for PVC are generally polyester or fiberglass (when not mechanically attached) and are added to provide improved strength, longevity and dimensional stability performance allowing the material to be a long-term, tested roof service with several setup choices.

After a century of fine tuning and technological improvements to the convenient flexibility by the inclusion of plasticizers, in 1985 PVC became the first single-ply roofing system to make a requirement from what is now ASTM International– ASTM D4434. At present, all business PVC roof membranes are reinforced.

Thermoplastic Polyolefin (TPO)

TPO was introduced in the 1980s. TPO consists of polymers as delineated in ASTM D5538.

In the polymer manufacturing process, polypropylene with ethylene-propylene rubber are polymerized; the polypropylene improves weldability and the ethylene-propylene boosts resilience. This polymer is then used with other essential components like fire retardants, UV stabilizers, antioxidants, and pigments to produce TPO roof membranes. Common TPO integrates both a cap and core membrane with a polyester strengthening scrim encapsulated between these layers. The cap is up to 75 percent TPO polymer with 25-35 percent fire retardants, along with small amounts of pigment and UV stabilizers. The core membrane is similarly made up however consists of up to 15 percent recycled TPO and it does not need UV security.